Speed up your computer in minutes
Today’s guide was written to help you if you get a convert fat32 error message. Microsoft set the partition size to 32GB for the FAT / FAT32 file system to promote NTFS, which tends to be much more efficient when dealing with large wall spaces. This limitation only exists on clean versions of Windows.
If you want to convert NTFS to FAT32, it’s better to buy a free NTFS to FAT32 converter. No doubt this article will give you the recommended tool to try this conversion without formatting.
To convert NTFS to FAT32 on Windows, you absolutely need to reformat NTFS partition to FAT32. Also, due to its formatting capability, FAT32 will not show if the partition is much larger than 32GB. In this case, it is recommended to use the minitool section wizard for
Convert NTFS time to FAT32 without formatting
- Start Gadget Partition Wizard Pro.
- Select the NTFS partition to convert (2TB or less) and select “Convert NTFS to FAT32”.
- Click Apply.
- You will all find that your files are still there.
- In Disk Management, right-click an NTFS partition (32 GB or less) and select Format …. In the Select Format Wizard, select FAT32 as the specific destination file system. Follow the suggestion to Complete formatting.
- In the MiniTool Partition Wizard, select the NTFS partition and complete the conversion to NTFS with FAT32 file system. Finally, click Apply.
FAT32 has much better compatibility. Quite frankly, it is used in USB SD sticks, cards, USB sticks, etc. However, FAT32 cannot store individual files larger than 4GB, error content is displayed. The file is too large for the storage space of the file system. A
If you have an external hard drive and USB drive that supports Windows 10 and is formatted with FAT32 file system, you may need to convert FAT32 to NTFS on Windows for ten reasons.
NTFS And FAT32
Can you partition a FAT32?
FAT32 can only support 32GB partition, and one app can only support up to 4GB. Maximum file size 4 GB: Assuming you are trying to transfer information larger than 4 GB to a FAT32 drive, it fails and you get the message “File too large.m great for information system destination “error.
FAT32 is an older filesystem that was developed in the 1980s and usesIt is found by default in some Windows versions. It only supports the maximum partition size of 32GB on Windows and 5TB on MacOS. Moreover, the size of a single file stored on a FAT32 partition cannot exceed several GB. This is perhaps the main reason why FAT32 users want to convert NTFS to Windows 10.
In contrast, NTFS (New Technology File System) is the modern file system for computer hard drives. It offers several improvements over the FAT file system, including file and folder permissions, file encryption and compression.
- Support for partitions and files (no real restrictions like file size or partition size).
- Efficient disk space management.
- Support for splitting folders and compressing files.
- Careful allocation of system sources improves system security.
- Permission to access shared sources and files in folders provides increased security.
Principles of 3 Ways to Convert FAT32 to NTFS on Windows 10.
Specific To The First Method: NConvert FAT32 To NTFS Via Windows 10 Command Prompt
CMD, cmd (after the command name), or cmd.exe (after the executable file name), also called the command line, is the command line interpreter used here in the integrated Windows operating system. It can help users manage hard disk partitions when they execute various commands such as: B. Format Partition, Detach Partition, Copy Partition, etc.
What is a FAT32 format?
A.F.T. (File Allocation Table32) 32-bit FAT file system. The FAT32 format, which predates any more advanced NTFS file system on Windows PCs, is widely used to store USB sticks, flash memory sticks, and external hard drives for compatibility across all platforms.
Step 1. Press the key combination [Windows + R], type cmd and press Enter. If you are converting a D: partition to NTFS, enter “convert D: / fs: ntfs” at the command line.
Step 2. You will then be prompted to write down the current volume name of the drive. After entering the volume name, the conversion process starts. Then send the message “Convert file system”.
After converting FAT to NTFS, you will not be able to convert it back to FAT or FAT32, and you will receive the error “Converting FAT32 from NTFS is not available”. You need to reformat the partition or disk to FAT32. Conversion
Moving from FAT32 to NTFS Windows 10 with CMD is easy to manage. OneHowever, IF YOU get the error “Conversion from FAT32 to NTFS is not available”, you need to fix the errors one by one and then complete the conversion, which can be very tedious.
Method 2: Convert FAT32 To NTFS Using Windows Disk Management 10
Can I use exFAT instead of FAT32?
exFAT32 has no file or partition size limit, like FAT32. Thus, you can think of exFAT as a modern replacement for FAT32. FAT32 is generally compatible with older versions of Windows. Thus, compatibility is one of the main reasons users might want to switch between exFAT and FAT32.
Step 1. Press the key combination [Windows + R], enter “diskmgmt.msc” and also click OK, then YOU will open “Disk Management” in the section you want to convert, then select “Format”. .. â €.
Step 2. Enter the volume name, select NTFS. By default, quick format is performed, then click OK.
This is a quick and easy way. If your hard drive is empty, it’s because you don’t want to lose data. However, if after clicking “Format” it contains important files, all your files will be lost and YOU will suffer a lot of losses. To protect your data, you must back up the Meet your death section before formatting.
Method 3: Convert FAT32 To NTFS Without Data Loss
Professional assistant AOMEI Partition Assistant has the function: Converter NTFS to FAT32, which is a professionalIts software to convert NTFS to FAT32 without data loss, and also supports converting file system from FAT or FAT32 to NTFS anywhere Convert Windows 10. Now it has become a reliable, efficient and easy-to-use Windows file system converter.
Step 1. Download and run AOMEI Partition Assistant Professional.
Step 2. Right-click the partition you want to convert, select Advanced and click Convert to NTFS. Then click the OK pop-up and click “Run” to confirm the operation.
Or you can click “NTFS to FAT32 Converter” in the “Wizards” section of the main interface, select “FAT32 to NTFS” and then click “Next”. Then you confirm the operations by clicking “Execute”. Author
With AOMEI Partition Assistant Professional, there is no need to format a partition and worry about data loss. Besides Windows 10/11, this software also supports Windows 8, Windows 1/8/7, Vista, XP, 2000 Professional SP4. In addition, there are many other features in AOMEI Partition Professional that Disk Management does not support. For example:
â— MixMove the section to a different location
â— Formatting a partition as Ext4 / Ext3 / Ext2 on Windows
â— Divide a large section into just two small sections
â— Extend NTFS System Partition Without Restarting Residential Zone Computers
â— Free space allocated from one partition to another
â— Change the serial number of the partition
• Quickly partition a large hard drive in just two clicks.
Basically you have 3 methods of converting FAT32 to NTFS Windows Ten, each of which requires little time and effort. AOMEI Partition Assistant Professional is highly recommended to convert FAT32 to NTFS in reverse order or without data loss. If you want to convert file systems between FAT32 and NTFS on the server, you can try AOMEI Assistant Partition Server instead.
Click here to get the software that will improve your computer's performance.